User Manual Q&AAnswer
Apr 15, 2025 - 10:04 PM
To connect the TROTEC BP21WP pyrometer to your smartphone, you need to follow these steps:
1. Make sure that the Trotec MultiMeasure Mobile app is installed on your smartphone.
2. Activate the Bluetooth function on your smartphone.
3. Turn on the BP21WP pyrometer by briefly pressing the On/off/measurement button three times. The LED on the pyrometer will flash yellow.
4. Open the Trotec MultiMeasure Mobile app on your smartphone.
5. Press the Sensors button on the app to open the sensors overview.
6. Press the Refresh button to scan for available sensors.
7. The BP21WP pyrometer should appear in the list of available sensors. Press the Connect button next to the pyrometer to connect it to your smartphone.
8. The LED on the pyrometer will flash green, indicating that it is connected to your smartphone.
9. The appSensor is now connected to your smartphone and you can start using it for temperature measurements.
Please note that these instructions are a general guide and may vary slightly depending on the specific smartphone model and app version. For more detailed instructions, refer to the user manual of the TROTEC BP21WP pyrometer.
Add New Comment