User Manual Q&AAnswer
Apr 15, 2025 - 10:03 PM
To set the DMX address for the P9 Tree spot LED Moving Head, you can do it directly on the display or within the DMX / NET ADDR menu.
1. To set the DMX address directly on the display, go to the main menu and use the up/down buttons to select the DMX address. Press the enter key to set the desired address.
2. To set the DMX address within the DMX / NET ADDR menu, navigate to the DMX ADDRESS submenu. Use the up/down buttons to set the desired address.
Note: The P9 Tree spot LED Moving Head has two DMX modes, Mode 1 and Mode 2. Make sure you are setting the DMX address in the correct mode. The current mode is displayed in the main menu.
Add New Comment