User Manual Q&AAnswer
Apr 14, 2025 - 11:21 AM
To code a remote handset to the AES e-Trans 50 Commercial Wireless Loop Kit, follow these steps:
1. Press and release the CODE button on the Transceiver. The Code LED will illuminate, indicating that the device is ready for coding.
2. Press the button on the remote handset that you want to activate the transceiver once. The Code LED will flash, indicating the coding sequence has started.
3. Press the same button on the remote handset a second time. The Code LED will flash again, indicating that the coding sequence is now complete.
4. You can continue coding more remotes by following the same process, waiting for 10 seconds for the code sequence to automatically exit, or press the coded remote once more to exit.
Note: The first time a remote is coded into the Transceiver, it sets the button allocation for that remote and all future remotes. So, if you choose button 1 on the first remote, all following remotes will activate from that button, regardless of which button you code the following remotes with.
For more detailed instructions and information, please refer to the AES e-Trans 50 Commercial Wireless Loop Kit manual.
Add New Comment