How do I code and calibrate the AES e-Loop Mini Residential Wireless Loop Vehicle Detection Kit? (AES e-Loop Mini Residential Wireless Loop Vehicle Detection Kit Instructions Manual)

Answer

manuals.plus

Apr 14, 2025 - 11:18 AM

To code and calibrate the AES e-Loop Mini, please follow the instructions provided in the manual.

1. Coding e-LOOP Mini:
- Press and hold the CODE button on the transceiver until the Red LED illuminates, then release the button.
- Press the CODE button on the e-Loop Mini. The Yellow LED on the e-Loop will flash 3 times to indicate transmission, and the Red LED on the transceiver will flash 3 times to confirm the coding sequence has been completed.

2. Fitting e-LOOP Mini:
- Before fitting, insert 2 x AA Lithium batteries into the e-Loop Mini and xxxx the bottom plate to the e-Loop using the M3 screws provided. Ensure all screws are tight.
- Place the e-Loop in the desired location and secure the base plate into the ground using 2 Dyna bolts (supplied). Avoid fitting near high voltage cables, as it can affect the e-Loop's detection capability.

3. Calibrating e-LOOP Mini:
- Move any metal objects away from the e-Loop, including cordless drills.
- Press and hold the CODE button on the e-Loop Mini. The Yellow LED will flash once, and keep your finger on the button until the Red LED flashes twice.
- Fit the e-Loop to the base plate using the 4 x Hex Head bolts. After 3 minutes, the Red LED will flash a further 3 times. This indicates that the e-Loop is now calibrated and ready to use.

To uncalibrate the e-Loop Mini, press and hold the CODE button, and the Yellow LED will flash. Keep your finger on the CODE button until you see the Red LED flash 4 times. Release the button, and the e-Loop will be uncalibrated.

For further assistance or inquiries, you can contact AES Global at sales@aesglobalus.com or call +1-321-900-4599. You can also visit their website at www.aesglobalus.com.