How do I install the BIXOLON SRP-330II Direct Thermal POS Printer? (BIXOLON Direct Thermal POS Printer Installation Guide)

Answer

manuals.plus

Apr 14, 2025 - 11:10 AM

To install the BIXOLON SRP-330II Direct Thermal POS Printer, follow these steps:

1. Cable Connection:
- Turn off the printer and any peripheral devices.
- Connect the power cord to the adapter and plug the adapter into the power supply connector of the printer.
- Identify the type of interface at the back of the printer (Serial, Dual Serial, USB, Ethernet, Parallel) and connect the appropriate interface cable.
- Connect the drawer kick-out cable to the drawer kick-out connector of the printer.

2. Installing Paper Roll:
- Press the Cover-Open button to open the cover of the printer.
- Insert a new roll of paper in the correct direction.
- Pull out a small portion of the paper and close the cover.
Note: When closing the cover, press down on the center to ensure that the paper is in contact with the roller. It is recommended to use the recommended paper for optimum printing quality.

3. Using Control Panel:
- POWER LED: The POWER light indicates that the printer is on.
- ERROR LED: This light indicates an error.
- PAPER LED: This light indicates the near end of the paper roll. When it blinks, it indicates the self-test printing standby state or macro execution standby state.
- FEED Button: Press the FEED button once to advance the paper one line. Hold down the FEED button to continuously feed the paper.

4. Mounting 2” Partition:
- Hang the partition at the front and press down the rear to mount the 2” partition.

For more detailed information and instructions, please refer to the BIXOLON SRP-330II Direct Thermal POS Printer's User Manual, which can be found on the BIXOLON website under the "Manual" section of the Download page.