How do I properly install HILTI threaded studs? (HILTI Threaded Studs Instruction Manual)

Answer

manuals.plus

Apr 14, 2025 - 10:51 AM

To properly install HILTI threaded studs, follow these steps:

1. Prepare the base material: Ensure that the base material is clean, free from dust, debris, and any other contaminants. It should also be structurally sound and capable of supporting the load.

2. Select the appropriate HILTI threaded stud: Choose the correct size and type of threaded stud for your application. Refer to the product manual or consult with a HILTI representative to determine the appropriate stud for your specific needs.

3. Mark the installation points: Use a marking tool to indicate the desired locations for the threaded studs on the base material. Ensure that the spacing and alignment are in accordance with the project requirements.

4. Drill the holes: Use a HILTI drilling tool equipped with the appropriate drill bit to create holes in the base material. The diameter and depth of the holes should match the specifications provided in the product manual.

5. Clean the holes: Remove any debris or dust from the drilled holes using a brush or compressed air. This will ensure proper adhesion and secure installation of the threaded studs.

6. Insert the threaded studs: Insert the threaded studs into the drilled holes. Make sure they are fully seated and aligned properly.

7. Tighten the threaded studs: Use a HILTI installation tool, such as a wrench or socket, to tighten the threaded studs. Follow the recommended torque values provided in the product manual to achieve the desired level of tightness.

8. Verify the installation: After tightening the threaded studs, visually inspect each one to ensure they are securely fastened and properly aligned. Perform any necessary adjustments or re-tightening if needed.

9. Test the installation: If required, perform load tests or other relevant tests to verify the strength and stability of the installed threaded studs. Follow the guidelines provided in the product manual or consult with a HILTI representative for specific testing procedures.

Remember to always refer to the HILTI Threaded Studs Instruction Manual for detailed instructions and safety guidelines specific to your product model.