User Manual Q&AAnswer
Apr 14, 2025 - 10:45 AM
To connect the SwellPro MP1 Megaphone to your SplashDrone 4, please follow these steps:
1. Turn on the aircraft, remote controller, and the Megaphone by pressing the power button on the Megaphone for 2 seconds. Wait for the remote controller to connect to the aircraft.
2. Wait for the Megaphone's status light to turn from solid green to flashing green quickly.
3. Connect your device to the remote controller's WiFi network (SWP-xxxxxx).
4. Open the SDFly 2 App on your device. Go to "Login Device" > "Settings" (top-right) > "General Settings" > "Connect to Megaphone".
5. Follow the in-App instructions to connect the Megaphone.
6. Once connected, you are now ready to use the Megaphone with the SDFly 2 App.
Note: After the initial configuration and connection, the Megaphone will automatically connect to the SplashDrone 4 when both devices are turned on. There is no need to reconfigure them again for future use.
If you encounter any difficulties in configuring and connecting the Megaphone, you can reset it by following these steps:
1. Turn on the Megaphone by pressing the power button for 2 seconds. Wait for the Megaphone's status light to turn from solid green to flashing green quickly.
2. Press the power button on the Megaphone 2 times. The Megaphone will reset and restart. Wait for the Megaphone's status light to turn from solid green to flashing green quickly.
After resetting, you can proceed with the connection process again.
For standalone use of the Megaphone without the SplashDrone 4, you can connect your mobile device directly to the Megaphone's WiFi network (Megaphone-xxxxxx) and follow the same steps mentioned above.
Please refer to the SwellPro MP1 Megaphone User Manual for more detailed information and troubleshooting tips.
Add New Comment