User Manual Q&AAnswer
Apr 14, 2025 - 10:44 AM
To charge the battery of the unitech TB170 Windows 11 Rugged Tablet, follow these steps:
1. Connect the AC/DC adaptor to the DC-in Jack (number 8) on the tablet.
2. Plug the AC Power Cord (US) into the AC/DC adaptor.
3. Connect the other end of the AC Power Cord to a power outlet.
4. The Battery Status LED (number 3) will glow to indicate that the battery is being charged.
5. Leave the tablet connected to the power source until the battery is fully charged.
6. The Battery Status LED will go out when the battery is fully charged or when the AC/DC adapter is disconnected.
Note: It is recommended to fully charge the battery before using it for the first time.
Please ensure that all connectors are kept away from contaminants such as dust, grease, mud, and water to prevent any communication issues, short circuits, or overheating. If any connector is damaged, it should be fully repaired before using the unit to avoid causing a short circuit.
For more information and detailed instructions, you can refer to the Quick Start Guide provided in the package or visit the official unitech website at http://www.ute.com/.
Add New Comment