User Manual Q&AAnswer
Apr 14, 2025 - 10:43 AM
To pair your Amazfit Bip 3 Pro with your phone, follow these steps:
1. Download and install the Zepp app on your phone by scanning the QR code displayed on the watch screen.
2. Open the Zepp app and log in.
3. On the watch, go to the QR code display screen and scan the QR code using the Zepp app to pair your phone with the watch.
4. Follow the prompts in the app to complete the pairing process.
Note: Make sure your phone's operating system is Android 7.0 or iOS 12.0, or later.
If you need to pair the watch with a new phone, follow these additional steps:
1. Open the Zepp app on your old phone and synchronize data with the watch.
2. On the old phone, go to Profile > Amazfit Bip 3 Pro page and tap the Unpair button at the bottom to unbind the watch.
3. If you have an iPhone, after unbinding, unpair the phone and the watch by going to the phone's Bluetooth menu, finding the Bluetooth name corresponding to the watch, and tapping the button on the far right of the Bluetooth name. Then tap "Ignore This Device".
4. Restore the factory settings of the watch. After the watch is rebooted, pair the watch with your new phone using the initial pairing procedure mentioned above.
Add New Comment