User Manual Q&AAnswer
Apr 14, 2025 - 10:29 AM
To connect the SunSDR2 Pro transceiver to your computer, you can use either a standard Ethernet or optional Wi-Fi connection. Here are the steps to connect:
1. Make sure your computer is connected to the same network as the SunSDR2 Pro.
2. Connect one end of an Ethernet cable to the Ethernet port on the SunSDR2 Pro.
3. Connect the other end of the Ethernet cable to an available Ethernet port on your computer or to a router or switch that is connected to your computer.
4. If you prefer to use Wi-Fi, make sure the SunSDR2 Pro has the optional Wi-Fi module installed. Consult the user manual for instructions on installing the Wi-Fi module.
5. On your computer, open the network settings and ensure that Wi-Fi is enabled and connected to the same network as the SunSDR2 Pro.
6. Once the connection is established, you can use the ExpertSDR2 software on your computer to control the SunSDR2 Pro transceiver remotely.
For more detailed instructions and troubleshooting tips, please refer to the User Guide provided with the SunSDR2 Pro transceiver.
Add New Comment