User Manual Q&AAnswer
Apr 14, 2025 - 09:38 AM
Installation of the SELFIO ED166 Buderus Electric Instantaneous Water Heater Logamax should be done by a qualified professional. However, I can provide you with a general overview of the installation process as outlined in the installation guide.
1. Location: Choose a suitable location for the water heater. It should be installed indoors, in a well-ventilated area, and away from flammable materials. Ensure there is enough space for maintenance and servicing.
2. Water Supply: Connect the cold water supply to the inlet of the water heater using a shut-off valve and a flexible hose. Make sure the water supply pressure is within the specified range mentioned in the manual.
3. Electrical Connection: The water heater requires a dedicated electrical circuit. Consult a qualified electrician to ensure proper wiring and grounding. Follow the electrical connection diagram provided in the installation guide.
4. Mounting: Securely mount the water heater to the wall using the provided mounting brackets. Ensure it is level and stable.
5. Exhaust Venting: Connect the exhaust vent pipe to the outlet of the water heater. The venting system should comply with local building codes and regulations. Refer to the installation guide for specific requirements.
6. Hot Water Outlet: Connect the hot water outlet to the desired plumbing fixtures using appropriate piping and fittings. Ensure proper sealing to prevent leaks.
7. Testing and Commissioning: Once the installation is complete, turn on the water supply and electrical power. Check for any leaks and ensure the water heater is functioning properly. Follow the startup and commissioning procedures mentioned in the manual.
It is important to note that these are general installation instructions, and it is highly recommended to consult the detailed installation guide provided with the product for specific instructions and safety precautions.
Add New Comment