User Manual Q&AAnswer
Apr 14, 2025 - 08:57 AM
To install the LUMASCAPE LINEALUX L3 LS9032 Foundation luminaire, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Ensure that you comply with all local electrical rules and regulations.
2. All electrical work must be performed by a licensed electrician.
3. Make sure to protect the luminaire from becoming hot by carefully selecting the mounting location.
4. The luminaire should only be used with a protective shield. If the shield is cracked, stop using the luminaire immediately and contact the manufacturer for a replacement.
5. If the external flexible cable or cord of the luminaire is damaged, it should be replaced by the manufacturer or a qualified person to avoid hazards.
6. The light source in the luminaire should only be replaced by the manufacturer or a qualified person.
7. Avoid staring directly at the operating light source. Position the luminaire in a way that prolonged staring is not expected.
8. Basic insulation has been maintained between line voltage and the control conductors.
9. Fix the flexible wiring connected to the luminaire to the wall if it is within arm's reach to reduce the risk of strangulation.
10. Ensure that the mains input power is surge protected.
11. Never make or break connections while the circuit is energized.
12. Do not modify or alter the product in any way.
13. Keep the luminaire clean and free of debris. Only clean it with warm water, avoiding the use of chemicals or abrasives.
14. Keep the connections clean and dry at all times.
15. The luminaire is suitable for use indoors or outdoors.
Please refer to the manual for more detailed instructions, including wiring designations and dimensions.
Add New Comment