How do I install the GE APPLIANCES Hotpoint Free-Standing Electric Range? (GE Appliances Hotpoint Free-Standing Electric Range Owner's Manual)

Answer

manuals.plus

Apr 14, 2025 - 07:50 AM


To install the GE APPLIANCES RBS330DR Hotpoint 30-Inch Free-Standing Electric Range, please follow the installation instructions provided in the owner's manual. Here are the general steps:

1. Ensure that you have the correct electrical supply. The range requires a 240V or 208V power source, depending on your electrical system. Check the KW rating and breaker size mentioned in the manual to determine the appropriate electrical requirements for your range.

2. Locate the electrical outlet box. The manual provides a shaded area in the drawing indicating the recommended location for the outlet box. Make sure the outlet is easily accessible and allows the range to be installed directly against the wall.

3. Use a locally approved flexible service cord or conduit for the electrical connection. This is important because the terminals will not be accessible after the range is installed.

4. Check the local codes for the required breaker size. The manual suggests a 40 Amps breaker for both 240V and 208V systems, but it's essential to verify this information with your local electrical codes.

5. Before proceeding with the installation, consult the installation instructions for the most up-to-date dimensional data and any additional requirements specific to your model.

Please note that these are general guidelines, and it's crucial to refer to the detailed installation instructions provided in the owner's manual for your specific model.