User Manual Q&AAnswer
Apr 14, 2025 - 06:55 AM
To set up the HI-TECH All-U-Need Glass-Crystal Model Machine, follow these steps:
1. Find a sturdy, level surface to place the machine on, away from open electrical outlets and flammable liquids.
2. Check for any damaged parts before use. Ensure proper alignment, no binding of moving parts, and no breakage of parts.
3. Only use identical All-U-Need parts for replacement. Using other parts may cause hazards or damage to the machine.
4. Use only recommended accessories to avoid risk of injury.
5. Read the instruction manual carefully to understand the machine's applications, limitations, and safety precautions.
6. Wear proper apparel, including safety goggles, to protect yourself from debris.
7. Keep the work area well lit and clean to avoid accidents.
8. Never operate the machine unattended and avoid using it while under the influence of drugs or alcohol.
9. Always use water as a coolant while grinding and never run the discs dry.
10. Avoid grinding rocks that contain poisonous elements such as uranium, mercury, lead, arsenic, etc.
11. Prevent water from running down the shaft and into the motor to avoid motor burnout.
12. Ensure the water level does not build up in the catch tray and that the drainage hole is open.
13. Do not force the machine or attachment to perform tasks beyond its design.
14. Discs will continue to spin after turning off, gradually slowing to a stop.
15. Maintain good balance and avoid awkward hand positions to prevent accidents.
16. Disconnect the machine from power before servicing and do not open the black cone body.
17. Clean and dry the machine after use.
18. Register your product for warranty coverage and consider purchasing an extended warranty for additional protection.
For more detailed instructions and safety information, refer to the HI-TECH All-U-Need Glass-Crystal Model Machine Instruction Manual.
Add New Comment