User Manual Q&AAnswer
Apr 13, 2025 - 09:39 AM
To install the ENCELIUM EN-ZB2DALI-CON-LI Wireless to DALI Luminaire Controller, follow these steps:
1. Ensure that the installation location is dry and indoors. The controller should not be mounted near gas or electric heaters or have power supply cords touching hot surfaces.
2. Secure the controller to the luminaire using a xxxx (not included). The recommended input voltage is 220 to 240 V, 50/60 Hz.
3. If you want to perform independent ceiling integration, you will need to install the ECO CI KIT (ordered separately). This kit provides strain relief housing for the controller. The ECO CI KIT should also be installed in dry, indoor locations only.
4. Remove the cable guards from the ECO CI KIT base and place the base onto the controller. Push the center of the cable guard down and bend it to wrap around the cable.
5. With the cable guards installed on the LINE IN and DALI cables, connect the wires into the controller ports. Place the ECO CI KIT cover onto the controller and tighten the screws.
Please refer to the ENCELIUM EN-ZB2DALI-CON-LI Wireless to DALI Luminaire Controller Instruction Manual for more detailed instructions and illustrations.
Note: It is important to follow all safety precautions and recommendations provided in the manual.
Add New Comment