User Manual Q&AAnswer
Apr 12, 2025 - 12:35 PM
To install the Hamaton 77-S253 FSK Sensor, follow these steps:
1. Remove the valve cap from the check port or valve where you want to install the sensor.
2. Fit the cap sensor onto the check port or valve and pre-twist it 2 or 3 turns.
3. Use a standard 3N.m torque wrench to tighten the sensor onto the valve check port.
It is recommended to use a torque of 3N.m.
4. If installing on a hose, make sure to keep the top of the cap sensor facing towards the outside.
Note: It is recommended to use an open-end wrench of size No.9 or 10 for the installation process.
Please refer to the Hamaton 77-S253 FSK Sensor Installation Guide for more detailed instructions and illustrations.
Add New Comment