User Manual Q&AAnswer
Apr 12, 2025 - 12:13 PM
To install the LENA LIGHTING Nectra LED Plus IP44 Downlight, please follow these instructions:
1. Ensure that the lighting fitting is not covered with an insulation mat or any other materials. There should be free space of about 10 cm around the installed luminaire.
2. Note that the downlight is a non-separable lighting fixture with a non-replaceable light source. Do not attempt to remove the diffuser or any other non-separable part of the fitting, as it may be dangerous. In case of any damage, the lighting fixture must be disposed of according to the description on the product.
3. If the external flexible cable is damaged, it should be replaced with a special cable available from the manufacturer or its after-sales service.
4. If your downlight includes an emergency module (AW) with an autotest feature, please refer to the provided information for specific instructions on its installation and usage.
5. Use the provided installation template to ensure accurate mounting dimensions.
6. It is recommended that assembly be carried out by a qualified person.
7. Clean any dirt that settles on the diffuser due to normal operation of the fitting with a damp cloth. Do not use abrasive cleaners.
For further information or assistance, you can contact LENA LIGHTING S.A. at the provided contact details:
Add New Comment