User Manual Q&AAnswer
Apr 12, 2025 - 11:59 AM
To change the fuel source from gasoline to propane/LPG or vice versa on the A-iPOWER GXS4300iDC Dual Fuel Inverter Generator, please follow these steps:
1. Disconnect all electrical loads from the generator.
2. If you are switching from gasoline to propane/LPG:
a. Connect the LPG gas hose to the propane fuel source.
b. Fully open the Propane/LPG cylinder xxxx .
c. Make certain the propane tank is fully closed.
3. If you are switching from propane/LPG to gasoline:
a. Make certain the propane tank is fully closed.
b. Fill the fuel tank with clean/fresh regular UNLEADED gasoline with a minimum 87 octane.
4. Once the appropriate fuel source is set:
a. Turn the starting dial switch to the START position.
b. Pull the recoil starter twice.
c. Turn the starting dial switch to the RUN position.
d. Pull the recoil starter slowly until resistance is felt, then pull rapidly.
Please note that it is important to consult the operator's manual for detailed instructions on changing fuels and to ensure proper safety precautions are followed during the process.
If you have any further questions or need assistance, you can contact A-iPOWER's product service department at 855-888-3598 or email them at support@a-ipower.com.
Add New Comment