User Manual Q&AAnswer
Apr 12, 2025 - 09:07 AM
To lock the controls on the VIVAX BH-02T Series Built-In Ceramic Circuit Board, follow these steps:
1. Press the front left hob selection key ( ) and the minus key ( - ) simultaneously.
2. You will hear a short warning signal.
3. Remove your fingers from the stove control panel.
4. Press the front left hob selection key again.
5. The child lock is now activated, and the icon " L " will be displayed on all hobs.
To unlock the controls, follow these steps:
1. Make sure the ceramic hob is turned on.
2. The " L " icon will be displayed on all displays when the stove is on and the child lock is active.
3. Press the front left hob selection key ( ) and the minus key ( - ) simultaneously.
4. You will hear a short warning signal.
5. Press the minus key ( - ) again immediately after the first step.
6. The child lock is now deactivated permanently.
Please note that the child lock will be deactivated if there is a power outage. Also, when the hob is in lock mode, all controls except the ON/OFF control are disabled.
Add New Comment