User Manual Q&AAnswer
Apr 12, 2025 - 09:02 AM
To connect the Teltonika FMB920 GPS Tracker to your computer, you have two options: using a Micro-USB cable or using Bluetooth.
1. Using a Micro-USB cable:
- Power up the FMB920 tracker with a DC voltage power supply (6-30V).
- Connect the device to your computer using a Micro-USB cable.
- If it's your first time connecting the device, you will need to install the USB drivers. You can download the drivers from the Teltonika website.
- Once the drivers are installed, the device should be recognized by your computer, and you can start using it.
2. Using Bluetooth:
- Power up the FMB920 tracker with a DC voltage power supply (6-30V).
- Turn on Bluetooth on your computer.
- Go to the Bluetooth settings on your computer and select "Add Bluetooth or other device."
- Choose your device named "FMB920_last_7_imei_digits" (without LE at the end).
- Enter the default password 5555 and press Connect.
- Once connected, you can start using the device on your computer.
Please note that for both methods, you may need to install additional software, such as the Teltonika Configurator, to fully utilize the features and configure the device according to your needs. You can download the Configurator software from the Teltonika website.
Add New Comment