How do I install the TERMA Rolo Towel Rail? (TERMA Rolo Towel Rail User Manual)

Answer

manuals.plus

Apr 12, 2025 - 08:50 AM


To install the TERMA 2630BTU Rolo Towel Rail, please follow the steps outlined in the user manual:

1. Start by selecting a suitable location for the towel rail. Ensure that it is close to a power outlet and within reach of the bathroom fixtures.

2. Use a spirit level to ensure that the towel rail will be installed horizontally. Mark the positions for the fixing brackets on the wall.

3. Drill holes at the marked positions and insert wall plugs if necessary.

4. Attach the fixing brackets to the wall using screws provided. Make sure they are securely fastened.

5. Connect the towel rail to the power supply. The towel rail should be connected to a fused spur or a switched socket outlet with a suitable rating.

6. Once the towel rail is securely fixed to the wall and connected to the power supply, you can turn on the towel rail using the power switch or control panel.

7. The towel rail will start heating up, and you can hang your towels on the heated bars.

8. Adjust the temperature settings according to your preference using the control panel or thermostat, if applicable.

Please note that these are general installation instructions, and it is important to refer to the specific user manual provided with the TERMA 2630BTU Rolo Towel Rail for detailed instructions and any additional steps or precautions.