User Manual Q&AAnswer
Apr 12, 2025 - 08:37 AM
To install the TERMA 2629BTU Rolo Towel Designer Towel Rail using the mounting bracket CKF 4x, please follow the steps outlined in the user manual:
1. Start by identifying the location where you want to install the towel rail. Ensure that it is close to a power source or within reach of the central heating system if you are using the water version.
2. Use a spirit level to ensure that the mounting surface is level. Mark the positions where the mounting brackets will be installed.
3. Take the mounting bracket CKF 4x and place it against the wall, aligning it with the marked positions. Use a pencil to mark the xxxx holes on the wall.
4. Drill holes at the marked positions using an appropriate drill bit, depending on the type of wall (e.g., masonry, plasterboard). Insert wall plugs into the drilled holes.
5. Attach the mounting bracket CKF 4x to the wall using screws. Ensure that it is securely fixed.
6. Once the mounting bracket is in place, you can now attach the TERMA 2629BTU Rolo Towel Designer Towel Rail to the bracket. Slide the rail onto the brackets until it clicks into place.
7. If you are using the water version, you will need to connect the towel rail to the central heating system. Please refer to the specific instructions provided in the user manual for the water version.
8. If you are using the dual fuel version, you will need to connect the towel rail to both the central heating system and the electric supply. Please refer to the specific instructions provided in the user manual for the dual fuel version.
9. Once the towel rail is securely installed and connected, you can turn on the central heating system or electric supply to start using the TERMA 2629BTU Rolo Towel Designer Towel Rail.
For more detailed instructions and diagrams, please refer to the user manual provided with the product.
Add New Comment