User Manual Q&AAnswer
Apr 12, 2025 - 08:33 AM
To clean the PowerPac PPV5500 Wet and Dry Vacuum Cleaner after use, follow these steps:
1. Remove and clean the turbine after each use. Wash it inside and out with water and soap, using a non-abrasive brush.
2. Dry the turbine thoroughly and put it back in place.
3. Tighten the nut by hand until the flat surface of the turbine is properly adjusted. Do not over tighten, as the turbine automatically tightens upon starting the machine.
4. The turbine is responsible for separating the dirty water from the airflow, so proper care is important for the performance of your appliance.
5. If the turbine becomes damaged (chipped or broken), bring the appliance to the Service Center for checks and repairs.
6. It is important to note that the appliance must NEVER be used without the turbine. Always place it back after cleaning it.
Please refer to the PowerPac PPV5500 Wet and Dry Vacuum Cleaner Instruction Manual for more detailed instructions and safety precautions.
Add New Comment