User Manual Q&AAnswer
Apr 12, 2025 - 07:48 AM
To install the Ardes AR437B Quartz Heater for Wall Mounting, follow these steps:
1. Start by assembling the provided kit, which includes 4 screws and 4 wall plugs.
2. Fix the four wall plugs to the wall, ensuring that the distance between them corresponds to the distance between the four hanging holes on the back of the appliance.
3. Tilt the main body of the heater down and unscrew the xxxx placed on the top of the protective flap. Then, tilt the main body up and unscrew the xxxx placed on the bottom of the protective flap.
4. Position the main body in a straight position (not tilted up or down) and remove the protective flap from the fixing plate.
5. Place the heater against the wall, making sure that the hanging holes on the back of the appliance align with the holes in the wall. Use the screws provided to securely fix the heater to the wall.
6. Replace the protective flap and secure it with the two screws that were previously removed.
7. The appliance must be installed at least 1.80m above the ground and 15cm from the ceiling.
Please refer to the instruction manual for visual illustrations and further details on the installation process.
Add New Comment