User Manual Q&AAnswer
Apr 12, 2025 - 07:45 AM
To connect the reader to the pdk Red 8 Eight Door Controller, follow these steps:
1. Mount the reader at the door.
2. Run a 22/5 or 22/6 wire from the reader to the door controller.
3. Wire the reader to the controller, ensuring to check polarity and voltage before powering the controller.
4. If using OSDP (Open Supervised Device Protocol), place the OSDP jumper(s) to enable OSDP communication.
5. If desired, connect a Piezo to an available relay and configure it with the software.
For more detailed instructions and illustrations, please refer to the user manual provided by ProdataKey Inc. You can view the user manual on their website at prodatakey.zendesk.com.
Add New Comment