User Manual Q&AAnswer
Apr 12, 2025 - 07:42 AM
To mount the Shenzhen Electron Technology E0029 10.1 Inch Medical Industry Digital Signage on a wall, you will need to follow these steps:
1. Ensure that you have the necessary mounting hardware, such as screws and wall anchors, suitable for the wall type you are mounting on.
2. Locate the VESA mounting holes on the back of the digital signage. These are four holes arranged in a square pattern with a spacing of 100x100mm.
3. Position the digital signage against the wall in the desired location for mounting. Use a level to ensure it is straight.
4. Mark the positions of the VESA mounting holes on the wall using a pencil or marker.
5. Drill holes at the marked positions on the wall, making sure to use the appropriate size drill bit for the wall anchors you are using.
6. Insert wall anchors into the drilled holes.
7. Align the VESA mounting holes on the digital signage with the wall anchors.
8. Securely attach the digital signage to the wall by inserting screws through the VESA mounting holes and into the wall anchors. Tighten the screws until the digital signage is firmly attached to the wall.
9. Double-check the stability of the mounted digital signage to ensure it is securely in place.
Please note that the mounting hardware and installation process may vary depending on the specific wall type and conditions. It is recommended to consult a professional or refer to the user manual for further guidance and specific instructions.
Add New Comment