How do I install the Strands Siberia Multiple Options Tail Light LED? (strands Siberia Multiple Options Tail Light LED User Manual)

Answer

manuals.plus

Apr 12, 2025 - 07:31 AM

To install the Strands 809224 Siberia Multiple Options Tail Light LED, please follow these steps:

1. Before installation, it is important to read all instructions and study the diagrams provided in the user manual.

2. Check with state or local authorities for laws governing usage and proper mounting of your new lights to ensure legal mounting.

3. Keep the product clean to maintain its performance and longevity. Use lukewarm water and alkaline degreasing to clean the lens and heat sink. Follow the degreasing instructions carefully and rinse off gently with cold or lukewarm water at low pressure.

4. Avoid using strong chemicals on the product, as they can damage the sealing adhesives and compromise the product's waterproofness. If you accidentally get strong chemicals on the product, rinse it off immediately with plenty of water.

5. Be cautious of using high water pressure close up on the product, as it may make it difficult for the product to close out the water.

6. If the product has a contact/connector, do not cut it as it will void the warranty. If the product has loose cables without a connector, do not cut the cable if it is shorter than 50 cm. Cutting the cable shorter than 50 cm will also void the warranty.

7. If the cable is longer than 50 cm, it is permissible to shorten the cable, but not shorter than 50 cm.

8. Ensure that screws and bolts are tightened properly to prevent them from loosening or chafing. However, do not overtighten screws to the point where the protective bearings on the product break.

9. Do not use higher volts than what is stated in the product description.

10. After continuous use, the light may become hot. Do not remove or touch the casing for at least 30 minutes after turning off the lamp to avoid burns.

If you need further support or have any additional questions, you can contact Strands at support@strands.se or call +46(0)320-450450. You can also visit their website at www.strands.se or www.strandseurope.com for more information.