User Manual Q&AAnswer
Apr 12, 2025 - 07:20 AM
To connect the MiDiPLUS Studio S Pro OTG to your mobile phone, you have two options: using the OTG port or the 3.5mm phone jack. Here are the steps for each method:
1. Using the OTG port:
- Connect one end of the Type-C cable (included with the product) to the Type-C OTG port on the Studio S Pro OTG.
- Connect the other end of the Type-C cable to your mobile phone's Type-C port.
- The OTG switch on the Studio S Pro OTG should be turned on (the button will light yellow) to enable the connection between the mobile phone and the OTG port.
2. Using the 3.5mm phone jack:
- Connect one end of the 3.5 TRRS cable (not included with the product) to the 3.5mm phone jack on the Studio S Pro OTG.
- Connect the other end of the 3.5 TRRS cable to your mobile phone's headphone jack.
- The CD switch on the Studio S Pro OTG can be used to control the routing between the mobile phone and the OTG. Press the switch once to turn on the route from the mobile phone to the OTG, and press it twice to turn off the route. Long press the switch for over 2 seconds to turn on the route from the OTG to the mobile phone, and long press it again to turn off the route.
Please refer to the hardware features section of the user guide for more details and visual references on the connections.
Add New Comment