User Manual Q&AAnswer
Apr 12, 2025 - 07:09 AM
To install the LEDISONS LDM30-02-WIT LED Dimmer, follow these steps:
1. Gather all the components included in the package, including the dimmer, frame, central plate, adjusting xxxx , xxxx terminals, screwing tool, mounting ring, connector, and thickening button. Note that the mounting ring and connector may only be required if the dimmer is used with certain brand cover frames.
2. For a standard dimmer installation:
a. Connect the dimmer according to the provided connection diagram.
b. Mount the dimmer in the accessory socket.
c. Attach the frame and the central plate.
d. Securely attach the adjusting xxxx .
3. For a two-way switch installation:
a. Connect the dimmer according to the provided connection diagram.
b. Connect the switch according to the diagram.
c. Mount the dimmer in the accessory socket.
d. Attach the frame and the central plate.
e. Securely attach the adjusting xxxx .
Please refer to the provided connection diagram for the specific wiring instructions.
Note: It is important to ensure that electrical equipment is installed and fitted by electrically skilled persons. Failure to follow the instructions may result in damage to the device and pose fire and other hazards. Always disconnect the device or load before carrying out any work, and consider all circuit breakers supplying dangerous voltage. The dimmer should be protected by a 10A maximum miniature circuit breaker.
For further details and safety information, please refer to the LEDISONS LDM30-02-WIT LED Dimmer Installation Guide provided with the product.
Add New Comment