User Manual Q&AAnswer
Apr 12, 2025 - 06:59 AM
To properly attach and align the SHAD W0CE42ST Top Master to your motorcycle, follow these steps:
1. Ensure that the Top Master is compatible with your specific motorcycle model. You can check compatibility with models in other continents on the SHAD website at www.shad.es.
2. Before fully tightening the screws, make sure that the Top Master is correctly attached and aligned. This will prevent any misalignment issues or damage to the product.
3. Start by placing the Top Master on the rear part of your motorcycle's seat, aligning it with the mounting points or brackets provided by the manufacturer.
4. Carefully insert the screws into the corresponding holes on the Top Master and your motorcycle's mounting points. Do not fully tighten the screws at this stage.
5. Once the screws are inserted, ensure that the Top Master is properly aligned with your motorcycle's seat and rear structure. Make any necessary adjustments to achieve proper alignment.
6. Once the Top Master is aligned, gradually tighten the screws in a cross-pattern to evenly distribute the pressure. Start with a light tightening and gradually increase the torque until the screws are securely fastened.
7. Double-check the alignment and attachment of the Top Master to ensure it is securely and correctly installed.
Remember, it is important to refer to the specific instructions provided in the SHAD W0CE42ST Top Master Instruction Manual for your motorcycle model.
Add New Comment