User Manual Q&AAnswer
Apr 12, 2025 - 06:50 AM
To connect the EVOLVEO EVO-RV-SU Smart Boiler Switching Unit to your Zigbee gate, please follow these steps:
1. Place the boiler switching unit within the range of the Zigbee gate.
2. Open the Smart Life App and access the added Zigbee gate.
3. Turn on the EVOLVEO EVO-RV-SU and press and hold the button for 3-5 seconds until the WiFi indicator starts blinking. This indicates that the device is ready for matching.
4. In the application, confirm that the LED indicator on the boiler switching unit is blinking.
5. After searching for the device (this may take up to 1 minute), press "Finished".
6. You can now rename the EVOLVEO EVO-RV-SU by selecting the product name and pressing the save button.
7. In the application, select the newly matched device and press "Sensor Selection". This will display a list of smart radiator heads that are matched with your Zigbee gate.
8. Using the switch on individual heads, you can select which heads will affect the operation of the EVOLVEO EVO-RV-SU. Your EVOLVEO Heat M30 v2 will work according to the program you set. If all heads matched with the EVOLVEO EVO-RV-SU are turned off, the boiler switching unit will turn off the connected water heater/boiler. If at least one of the matched heads opens, the boiler switching unit will turn on your water heater/boiler again.
Note: Each device can only be paired with one account. If you want to use the socket with multiple devices, you can share the device using the Tuya app.
For further assistance or in case of any difficulties during the process, we recommend contacting the service center or referring to the FAQs section on the EVOLVEO website.
Add New Comment