How do I install the LUTEC LED Wall Light? (LUTEC LED Wall Light User Manual)

Answer

manuals.plus

Apr 12, 2025 - 06:46 AM


To install the LUTEC 5198102118 LED Wall Light, please follow the instructions provided in the user manual. Here is a step-by-step guide:

1. Before installation, ensure that the power supply is switched off to avoid any electrical hazards.

2. Choose a suitable location for the wall light. It should be mounted on a solid and stable surface.

3. Use the provided screws and wall plugs to attach the mounting plate to the wall. Make sure the plate is level and securely fixed.

4. Connect the wires from the wall light to the electrical supply. The light requires a supply voltage of 220-240V~ at 50/60Hz. It is a Class I product, so it must be connected to earth.

5. Once the wiring is complete, attach the light fixture to the mounting plate. Align the holes on the fixture with the screws on the plate and slide it into place.

6. Secure the fixture using the provided screws or locking mechanism, ensuring it is firmly attached.

7. After installation, switch on the power supply and test the light to ensure it is functioning properly.

Please note that these are general installation instructions. For specific details and illustrations, refer to the user manual provided with the product. If you have any further questions or need assistance, you can contact LUTEC Europe directly or consult their website for support.