User Manual Q&AAnswer
Apr 12, 2025 - 06:27 AM
To pair the camera and monitor on the Alecto DVM-71 video baby monitor, please follow these steps:
1. Make sure both the camera and monitor are turned on and within range of each other (maximum range is specified in the manual).
2. On the monitor, press the MENU button to enter the menu.
3. Use the arrow buttons to navigate to the "Camera" option and press OK.
4. Select the camera number you want to pair (if you have multiple cameras) and press OK.
5. On the camera, press and hold the PAIR button until the LED indicator starts flashing.
6. On the monitor, press the PAIR button to start the pairing process. The monitor will search for the camera and establish a connection.
7. Once the pairing is successful, the camera's LED indicator will stop flashing, and the monitor will display the camera's video feed.
Note: If the pairing process fails, make sure the camera and monitor are within range and try again. Also, ensure that no other devices are causing interference with the wireless signal.
For more detailed instructions and illustrations, please refer to the Alecto DVM-71, DVM71BK Video Baby Monitor User Guide available at the provided internet address: http://DOC.hesdo.com/DVM-71-DOC.pdf
Add New Comment