User Manual Q&AAnswer
Apr 12, 2025 - 06:21 AM
To install the TRAN LED QOM-eLED+AW LED Power Supply for exterior use, please follow the steps outlined below:
1. Safety Precautions:
- Before starting the installation, ensure that the power supply is disconnected from the power source.
- Use appropriate personal protective equipment (PPE) such as gloves and safety glasses.
2. Mounting the Power Supply:
- Select a suitable location for mounting the power supply. It should be a dry and well-ventilated area.
- Ensure that the power supply is mounted securely using the provided mounting holes or brackets.
- Avoid mounting the power supply near heat sources or areas with excessive moisture.
3. Electrical Connections:
- Connect the input power wires (AC) to the power supply according to the electrical specifications provided in the product manual.
- Ensure that the power supply is properly grounded to prevent electrical hazards.
- Use appropriate wire connectors or terminal blocks to make secure connections.
4. LED Connections:
- Connect the output wires (DC) of the power supply to the LED lighting fixtures.
- Make sure to match the positive (+) and negative (-) terminals correctly to avoid damaging the LEDs.
- Use proper wire connectors or soldering techniques to ensure reliable connections.
5. Testing and Troubleshooting:
- Once the installation is complete, reconnect the power supply to the power source.
- Check if the LED lighting fixtures are functioning properly.
- If any issues arise, refer to the troubleshooting section of the product manual for guidance.
Please note that this is a general installation guide, and it is essential to refer to the specific product manual provided by Q-Tran Inc. for detailed instructions and safety precautions.
Add New Comment