How do I assemble the ET2 Contemporary Lighting Half Moon 3-Light LED Pendant? (ET2 Contemporary Lighting Half Moon 3-Light LED Pendant Instruction Manual)

Answer

manuals.plus

Apr 12, 2025 - 06:15 AM

To assemble the ET2 Contemporary Lighting E20364 Half Moon 3-Light LED Pendant, please follow these steps:

1. Before starting, ensure that you have all the required components for assembly.
2. Choose a clean and level assembly area, avoiding hard surfaces that may damage the product.
3. Carefully remove all packaging materials and retain them for future use.
4. Take care when lifting the product and assemble it in close proximity to where you intend to position it.
5. Read the instruction sheet carefully before starting the assembly process.
6. Begin by connecting the wires from the pendant to the corresponding wires from your electrical supply. Follow the wiring instructions provided in the manual.
7. Once the wiring is complete, attach the pendant to the ceiling using the included mounting hardware. Make sure to securely fasten it to ensure stability.
8. Install the recommended bulbs into the pendant, making sure not to exceed the maximum wattage specified in the manual.
9. After installation, switch off the power source before cleaning or maintaining the pendant.
10. To clean the pendant, use a soft cloth and a mild detergent. Avoid using abrasive cleaners that may damage the finish.
11. For polished finishes, you can use talc powder to reduce the appearance of fingerprints and smudges.
12. Periodically, every 90 days, check and tighten all screws to ensure they are fully tightened.
13. Avoid prolonged exposure to heat sources, as it may cause glazing, melting, scorching, or fading of the color.

Please refer to the ET2 Contemporary Lighting E20364 Half Moon 3-Light LED Pendant Instruction Manual for detailed diagrams and specific instructions for your model.