Answer

Apr 12, 2025 - 05:45 AM
To install the Namron 3220234 Alfa Eco Downlight 8W matt hvit 8-pack, please follow the instructions below:
1. Ensure that the installation is carried out by a registered electrical company for safety purposes.
2. Determine the desired location for the downlight and make sure there is a minimum distance to flammable materials in the beam direction.
3. Connect the external driver to the downlight using the quick connector provided. This will allow for faster and easier installation.
4. If you wish to mount the downlight directly into an insulation sheet, ensure that it is compatible and follow the manufacturer's guidelines for installation.
5. The downlight is dimmable with a trailing edge dimmer. Make sure you have a compatible dimmer switch installed if you want to adjust the brightness.
6. The downlight has a beam angle of 38° and a tilt of 30°, so position it accordingly to achieve the desired lighting effect.
7. The downlight is rated IP44, which means it is protected against splashing water. However, it is important to avoid direct exposure to water.
8. The downlight has a lifetime of 50,000 hours with L90 rating, indicating that it will maintain at least 90% of its initial lumen output over that time.
Please note that the above information is a general guide. For specific installation instructions and safety precautions, refer to the instruction manual provided with the product.
Add New Comment