User Manual Q&AAnswer
Apr 12, 2025 - 05:34 AM
To install the FISHER PAYKEL 25313 Door panel for Integrated Column Refrigerator or Freezer, please follow the steps below:
1. Make sure the refrigerator or freezer is turned off and unplugged from the power source.
2. Remove any existing door panel by unscrewing the screws or clips holding it in place.
3. Align the new door panel with the front of the refrigerator or freezer door.
4. Use the provided screws or clips to secure the door panel to the door. Refer to the user guide for the specific installation instructions for your model.
5. Once the door panel is securely attached, you can choose to install a handle and toe kick accessory to complete the look. These accessories are sold separately.
6. After installation, plug the refrigerator or freezer back into the power source and turn it on.
Please note that the dimensions and specifications provided in this user guide are specific to the FISHER PAYKEL 25313 Door panel for Integrated Column Refrigerator or Freezer. If you have a different model or version, it is recommended to contact Fisher & Paykel's Customer Care Centre for the most accurate and up-to-date information.
For further assistance or troubleshooting, you can reach Fisher & Paykel's Customer Support at T 0800 372 273 or visit their website at www.fisherpaykel.com.
Add New Comment