User Manual Q&AAnswer
Apr 12, 2025 - 05:25 AM
To attach the camera mount assembly to the AV cart, follow these steps:
1. For AD-TVC-20 cart:
a. Remove the rubber cable management grommet from the slot on the cart.
b. Determine the two holes needed on Upright Bracket A to hold the Camera Mount Assembly at the desired height.
c. With assistance, hold the Camera Mount Assembly sideways and align the lower of the two holes with the hole directly above the cable management slot on the cart.
d. Insert M6 xxxx H with Washer J through Upright Bracket A and into the hole on the cart.
e. Attach M6 Flange Nut I to M6 xxxx H inside the cart column through the cable management slot. Tighten using 5mm Hex Key D.
f. Use Spanner F to support M6 Flange Nut I whilst tightening M6 xxxx H.
g. Rotate the camera mount assembly to its final position and secure it to the top hole on the cart using M6 xxxx H, Washer J, and 5mm Hex Key D.
h. Install your preferred device on the Camera Shelf B, ensuring it is secured using the xxxx hole or straps.
2. For AD-TVC-45 cart:
a. Fasten the Camera Mount Assembly to the Cart at the desired height using M5 Screws G and Washers J using 4mm Hex Key E.
b. Install your preferred device on the Camera Shelf B, ensuring it is secured using the xxxx hole or straps.
3. For AD-TVC-70A cart:
a. Remove the Top Cap from the cart.
b. Insert the silver clamp plate (attached to Upright Bracket A) into the top of the rear mounting channel of the upper column of the cart.
c. Move the Camera Mount Assembly to the desired height and secure it by tightening the screws using 5mm Hex Key D.
d. Install your preferred device on the Camera Shelf B, ensuring it is secured using the xxxx hole or straps.
e. Replace the Top Cap.
4. For AD-TVC-75 cart:
a. Fasten the Camera Mount Assembly to the Cart at the desired height using M5 Screws G and Washers J using 4mm Hex Key E.
b. Install your preferred device on the Camera Shelf B, ensuring it is secured using the xxxx hole or straps.
Please refer to the ATDEC AD-TVAC-CM AV Cart Camera Mount Installation Guide for detailed illustrations and additional information.
Add New Comment