How do I install the HAVIT Nadia Garden Spike Light? (havit Nadia Garden Spike Light Installation Guide)

Answer

manuals.plus

Apr 12, 2025 - 05:08 AM

To install the HAVIT Nadia Garden Spike Light (Model No. HV1462T or HV1462RGBW), please follow these steps:

1. Ensure that the electrical circuit is free of voltage by switching off the master switch.
2. Choose the desired location for the light and place the fitting there.
3. Connect the cable to the light. It is important to use an appropriate 12v DC LED Driver and not connect the light fitting directly to 240V.
4. Strip back the cable on both the fitting and the cable run. Twist the positive cable from the fitting to the positive on the cable run, and connect the neutral from the fitting to the neutral on the cable run.
5. Solder all joins using solder and either a heat gun or butane gas torch.
6. Cover the connections using an adhesive-lined heat shrink or gel cap to make the connection watertight. Failure to do this step will void the warranty.
7. Heat the heat shrink or crimp the gel cap, ensuring that all connections are covered.
8. For the HV1462T model, the color temperature is preset to 3000k. To change it, remove the cover from the fitting by twisting it counterclockwise and set it aside. Remove the globe from the fitting and move the switch on the side of the globe to the desired color temperature. Reinsert the globe by aligning the pins with the holes of the lampholder and pushing down gently. Reattach the cover by turning it clockwise, ensuring that the seals are in place and the caps are tight to avoid water penetration.
9. Adjust the fitting to the desired position, making sure to stop rotating when the fitting cannot rotate anymore. Forcing the fitting to rotate further can cause internal cables to become entangled and may result in a short circuit, which will void the warranty.
10. Carefully inspect all connections before switching the electric circuit back on.

Please note that it is crucial to have the installation done by a qualified electrician, as stated in the safety instructions. For any further questions or concerns, you can contact HAVIT Lighting at the provided contact details.