User Manual Q&AAnswer
Apr 12, 2025 - 04:52 AM
To attach the LIGHTOLIER 3D Printed Lighting Track Heads to a single circuit track system, please follow these steps:
1. Insert the track head into the track, ensuring that the LOCKING LEVER is on the same side of the track as the BEAD.
2. Rotate the track head 90° clockwise.
3. Continue rotating the track head until the LOCKING LEVER snaps and locks in place.
To remove the track head, depress the LOCKING LEVER and rotate the fitting 90° counterclockwise.
Please refer to Figures 1a-3a in the instruction manual for the Lightolier adapter, Figures 1b-3b for the Halo adapter, and Figures 1c-3c for the Juno adapter for visual guidance.
It is important to note that if you are using a track with fixtures, it may not be balanced and could pivot if a flexible cable is used to suspend the track stick. To ensure proper alignment, it is recommended to utilize a stiff stem mounting system.
For any additional questions or concerns, please refer to the instruction manual provided or contact Signify North America Corporation at (732) 563-3000 or Signify Canada Ltd. at (905) 927-4900.
Add New Comment