User Manual Q&AAnswer
Apr 12, 2025 - 04:40 AM
Here are the steps to install the MARS GAMING MCPU66 CPU Cooler on an Intel motherboard:
1. Remove the fan from the cooler by opening the buckles pointed by the arrow.
2. Install the bracket mount on the cooler base and fasten the screws.
3. Evenly spread the heatsink paste on the surface of the CPU and remove the plastic protection.
4. Move the bracket xxxx to the corresponding position according to the motherboard socket type.
5. Move the backplate slider to the corresponding motherboard socket (LGA115X/17XX/1366). If the motherboard socket is LGA2011, use the original motherboard backplate.
6. Place the radiator on the CPU and xxxx the backplate to the bracket mount.
7. After installing the fan, connect the PWM cable to the CPU-FAN connector of the motherboard.
For more detailed instructions and illustrations, please refer to the MARS GAMING MCPU66 CPU Cooler Instruction Manual.
Note: Make sure to consult your motherboard's user manual for compatibility with ARGB lighting control.
Add New Comment