User Manual Q&AAnswer
Apr 12, 2025 - 04:37 AM
To pair the remote with the wireless blind, follow these steps:
1. Make sure the wireless blind is turned on.
2. Open the back cover of the remote and locate the pairing button.
3. Short press both buttons on the blind to wake up the device. It will be ready for pairing for 2 minutes.
4. Hold the remote close to the wireless blind, no more than 5 cm away.
5. Press and hold the pairing button on the remote for at least 10 seconds.
6. A red LED light will illuminate on the remote, and a white LED light will begin to dim and flash on the wireless blind, indicating successful pairing.
Note: Up to 10 wireless blinds can be paired with one remote. Make sure to pair one blind at a time. If you have difficulties pairing multiple blinds, temporarily disconnect those that have already been paired by disconnecting the battery pack inside the blind. This will help with the pairing process.
Please refer to the instruction manual for more detailed information and illustrations on pairing the remote with the wireless blind.
Add New Comment