User Manual Q&AAnswer
Apr 12, 2025 - 04:36 AM
To install the Paul Neuhaus MELINDA LED Pendant Light, follow these steps:
1. Ensure that the power supply is switched off before starting the installation.
2. Mount the pendant light to the desired location using the provided mounting hardware and following the manufacturer's instructions.
3. Connect the pendant light to a 230V/50Hz power source.
To use the dimmer function on the Paul Neuhaus MELINDA LED Pendant Light, follow these steps:
1. Ensure that the light is turned on using the switch on the wall or power source.
2. Press and hold the dimmer button on the pendant light for a few seconds until the light starts to dim.
3. Release the dimmer button when the desired brightness level is attained.
4. The pendant light will save the brightness level, so the next time you turn it on, it will start at the same level.
For further assistance or any other inquiries, you can contact Paul Neuhaus GmbH's customer service at +49(0)2922 9721 9290 or email them at Kundenservice@neuhaus-group.de. You can also visit their website at www.paul-neuhaus.de for more information.
Add New Comment