How do I assemble the Kmart Animated Ghost and Tombstone? (Kmart Animated Ghost Tombstone Instruction Manual)

Answer

manuals.plus

Apr 12, 2025 - 04:00 AM

To assemble the Kmart KC43169047 Animated Ghost and Tombstone, please follow these steps:

1. Start by inserting the upper part of the TOMBSTONE into the bottom part, assembling it into one piece.
2. Snap lock the round tube to the metal base of the FRAME. Make sure to match A to A and B to B on the frame.
3. Insert the TOMBSTONE into the front of the FRAME. The TOMBSTONE should fit between the FRAME uprights and the front of the curved base.
4. Unfold the left hand of the Skeleton and snap lock it to the Frame. Match C to C on the frame.
5. Connect the wire from the TOMBSTONE to the control box located on the FRAME. Match D to D on both.
6. Insert the 3 included AA batteries into the battery compartment on the control box. Make sure to insert them with the correct polarity (+/-) as indicated.
7. Move the switch on the control box to the ON position.
8. To activate the item, either move in front of it or make a loud sound (clap).

Please note that battery installation and removal should be performed by an adult. It is also important to remove the batteries when the item is not in use. Make sure to use only the recommended batteries and not mix different types or new and used batteries. Dispose of exhausted batteries properly and do not dispose of them in fire as they may leak or explode.

Additionally, please be aware that this item is not a toy and is intended for decoration only. It contains small parts that can be a choking hazard, so it is not suitable for children ages 14 years and younger. The product is intended for use by persons 14 years of age and older.

Finally, some important safety precautions to keep in mind: Do not turn on the item until you have completely finished assembly. Stay clear of the item while it is operating. Do not place the item on uneven ground and avoid placing any weight on it while it is in operation.