User Manual Q&AAnswer
Apr 12, 2025 - 03:57 AM
To connect your Q-TRAN LED lighting fixture to the SCENE app, please follow these steps:
1. Make sure your phone is connected to your Wi-Fi network.
2. Open the SCENE app and click on "Register" to create a new account using your email address. Accept Wi-Fi and Bluetooth permissions and enable location services for accurate weather information.
3. Verify your new account using the six-digit verification code sent to you via email and create a password.
4. Refer to the label on your dongle to determine if the connection is Bluetooth or Wi-Fi.
5. Enable Bluetooth or be on the same Wi-Fi network depending on the dongle type.
6. Connect the fixture to the dongle.
7. Connect the dongle to the power supply.
8. Plug in the power supply to a power outlet. Do not dim the power supply.
9. If you have multiple dongles, hold down the "Q" button on the dongle to enter connection mode. Your fixture will start flashing.
10. Add your lighting fixture by clicking "+Add Device" or by clicking the "+" in the top right corner of the home screen.
- If your fixture is flashing, it should be discovered by the app automatically. If not discovered, try the manual mode.
- In manual mode, hold down the "Q" button on the dongle to enter connection mode. Your fixture will start flashing. Select the product type from the "Add Manually" screen to connect your product. This may take up to one minute.
11. Name and assign your fixture to a room and click "Done". Your fixture is now connected and can be found on the home screen of the app.
12. You can now control your lighting fixtures from the home screen. Press the device name to access controls and settings or press the power button on the right to turn fixtures on or off.
For further assistance, you can contact technical support at (203) 367-8777, option #4, or email sales@q-tran.com.
Add New Comment