How do I assemble the ACCORD LIGHTING Pendant Light Fixture? (Accord Lighting Pendant Light Fixture Instruction Manual)

Answer

manuals.plus

Apr 12, 2025 - 03:54 AM

To assemble the ACCORD LIGHTING E-26 Pendant Light Fixture, please follow these steps:

1. Ensure that the rated luminaire voltage requirements are compatible with the available mains supply in which it will be installed.

2. Remove the protecting package from the pieces, being careful not to harm any parts with cutting surfaces or objects. Lay the parts of the fixture on a horizontal surface.

3. Install a mini-LED bulb (A15) on the E-26 socket.

4. Assemble the glass globe on the aluminum base. Hold the two metallic tabs carefully and insert the globe one side at a time below the tabs. Release the tabs one at a time to keep the globe fixed in place.

5. The luminaire is now ready to use. Plug the fixture into a proper outlet and use the floor switch to turn the fixture ON/OFF.

Please note that it is important to read the assembly instructions completely and carefully before proceeding. Failure to comply with these instructions may cause accidents and loss of product warranty. Save these instructions for future reference.

For any warranty service, please contact your local dealer for further instructions. The manufacturer's responsibility regarding the product warranty is related to the correct observation of the instructions contained in the manual. The manufacturer is not responsible for any damage to the product caused by accidents, alterations, improper usage, or improper installation.

For additional information or if you have any further questions, please contact the manufacturer. The illustrations in the manual are for guidance only and may vary in scale, dimensions, and model details.