How to properly adjust cutting blade on my DAHLE Professional Series Stack Cutter? (Dahle Professional Series Stack Cutters Instruction Manual)

Answer

manuals.plus

Apr 12, 2025 - 03:52 AM


To adjust the cutting blade on your DAHLE 842, 846, or 848 Professional Series Stack Cutter, please follow these steps:



1. Ensure that the stack cutter is turned off and unplugged from the power source before attempting any adjustments.



2. Locate the cutting blade adjustment  xxxx , which is typically located on the front or side of the stack cutter.



3. Loosen the blade adjustment  xxxx  by turning it counterclockwise. This will allow you to adjust the blade position.



4. Carefully lower the cutting blade by turning the blade adjustment  xxxx  clockwise. Start with a small adjustment and test the cutting action before making further adjustments.



5. If the blade is not cutting cleanly through the stack of paper, you may need to increase the blade pressure. To do this, turn the blade adjustment  xxxx  clockwise to raise the blade slightly.



6. Continue adjusting the blade position and pressure until you achieve the desired cutting result. It is recommended to make small adjustments and test the cutting action after each adjustment.



7. Once you have achieved the desired cutting performance, tighten the blade adjustment  xxxx  by turning it clockwise. Ensure that it is securely tightened to prevent any movement during operation.



Please note that these instructions are general guidelines, and it is important to refer to the specific instructions provided in the  for detailed information and safety precautions.