User Manual Q&AAnswer
Apr 12, 2025 - 03:32 AM
To program the learning keys on the zapperbox M1 remote control, follow these steps:
1. Press and hold the black Power Key until the red LED flashes for a while and then stays on solid. This indicates that the remote is now in learning mode.
2. Press and release one of the three programmable keys (the one you wish to program). The red LED will start blinking.
3. With the teaching remote 3-5mm away from and pointed at the learning remote, press and hold the teaching remote button until you see the learning remote red LED blink quickly 3 times. This indicates that the button is now programmed.
4. The red LED will still be on solid, indicating that you are still in learning mode. You can repeat step 3 for each of the other two learning keys.
5. If the programming fails, the red LED will blink quickly 5 times. In that case, try repeating the programming process.
6. When you are done programming, press any button outside the learning key area to exit the learning state, and the red indicator light will turn off.
Please refer to the zapperbox M1 remote control user manual for more detailed instructions and illustrations.
Add New Comment