User Manual Q&AAnswer
Apr 12, 2025 - 03:17 AM
To start the Razor RIPSTIK Rush, you need to follow these steps:
1. Make sure the unit is traveling at least 3 mph (5 km/h) before the motor will engage.
2. Kick to start the unit to at least 3 mph (5 km/h) while applying the throttle to engage the motor.
3. Place one foot on the front deck plate and with the other foot, push (kick start) the Razor RIPSTIK Rush while holding the lever on the remote in the "GO" position.
4. Once the motor has engaged, place your other foot on the rear deck plate.
Please note that the Razor RIPSTIK Rush is intended for use on flat, dry surfaces, such as pavement or level ground, without loose debris. It is important to ride defensively, watch out for potential obstacles, and avoid excessive speeds. Always wear proper protective gear, such as a safety helmet, elbow pads, kneepads, and wrist guards, and follow all safety guidelines provided in the owner's manual.
Add New Comment