User Manual Q&AAnswer
Apr 12, 2025 - 02:45 AM
To assemble and use the AENO SM2 Steam Mop, please follow these steps:
1. Unpack the mop and accessories.
2. Open the cover of the water tank on the body of the appliance. Fill the water tank with water using the measuring cup provided. Put the cover back.
3. Depending on the cleaning task, choose the appropriate accessory from the supplied accessories (microfiber pad, nylon brush, brass brush, jet nozzle, squeegee, crevice brush).
4. Attach the handle to the extension tube and insert the tube with the handle into the steam mop body.
5. Slide the steam mop body into the steam mop head opening.
6. Attach the underside of the mop pad to the Velcro of the steam mop head.
7. If using the jet nozzle, attach it to the body of the steam mop according to the instructions.
8. Plug the power cord plug into a power socket.
9. Press the steam button for 2 seconds to start heating. Wait approximately 15 seconds until two LEDs flash. Press the steam button again to start operation. Two LEDs will light up steadily, indicating that steam is being produced.
10. When you have finished using the steam mop, press the steam button again for 2 seconds. Unplug the appliance from the mains.
11. Wait until the steam mop has cooled completely, and then wipe it with a clean, soft cloth.
Note: You can adjust the steam mode with the steam button. The number of lights illuminated will change accordingly, indicating the steam intensity.
Please refer to the user manual for additional information on limitations, warnings, troubleshooting, and recycling instructions.
Add New Comment